ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
Note
♦ To loosen/tighten the anti-theft wheel bolts a special adapt‐
er, located in vehicle tool kit, is required.
♦ To loosen the anti-theft wheel bolts (lockable wheel bolts) do
not use an impact screwdriver.
♦ If the adapter to loosen or tighten the anti-theft wheel bolts
is not available in the vehicle, use the corresponding adapter
set for tamper-proof wheel bolts.
– Fit adapter -2- onto anti-theft wheel bolt -1- as far as stop.
– Fit wheel brace onto adapter -2- as far as stop.
– Tighten wheel bolts diagonally to specified torque.
Specified torque
Wheel bolts
Nm
120
4.30
Tyre Pressure Loss Indicator: calibrat‐
ing
Note
♦ The calibration of the Tyre Pressure Loss Indicator must on‐
ly be performed “after” the tyre pressure has been corrected
to the prescribed values.
♦ If no pressure loss and tyre damage are found after a tyre
pressure warning, the incorrect warning can be rectified by
calibrating.
Tyre Pressure Loss Indicator compares the speed and thus
the rolling circumference and vibrations of the individual wheels
via the ABS sensors. If the tyre pressure changes on one or
several wheels, the Tyre Pressure Loss Indicator will indicate
this in the dash panel insert and the Infotainment system.
The rolling circumference of tyre changes if:
♦ The tyre pressure is too low.
♦ The tyre has structural damage.
♦ The vehicle is loaded more heavily on one side.
52
4. Descriptions of work
ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
♦ The wheels on one axle are loaded more heavily (e.g. when
towing a trailer or when driving in mountains).
♦ Snow chains are fitted.
♦ The temporary spare wheel is fitted.
♦ One wheel per axle has been changed.
The tyre pressure monitoring warning lamp has a yellow warn‐
ing lamp in the dash panel insert -arrow-.
♦ A “PERMANENT LIGHTING-UP” in conjunction with a warn‐
ing tone, means “WARNING”, pressure loss has been detec‐
ted, check tyre pressure and carry out calibration.
Calibration
– Switch on ignition.
– Switch on Infotainment system.
– Personalisation: select user and confirm with function button
OK .
– Press Vehicle function button.
– Select function button Status .
– Select function button Status (top).
– Navigate to last menu.
– Press Set function button.
– Confirm tyre pressures with function button Confirm .
4.31
Tyre repair set: checking
Note
♦ Depending on the equipment level, the vehicles are equip‐
ped with a breakdown set.
♦ It also contains a filling bottle with tyre sealant.
4. Descriptions of work
53
2024 VW ID.4 Owner's Manual
